Precimax Engineers
Precision Since 1985ZED Bronze Certified – Govt of IndiaThe standards we follow, the checks built into every order, and the certifications that back them up — so your quality team has what it needs before a PO is raised.
We benchmark our internal quality system and inspection practice against these recognised standards, whether or not a given order formally requires them.
Our Quality Management System is structured to ISO 9001:2015 principles — documented processes, corrective action and continual improvement. Formal certification is currently in progress.
General tolerances for linear and angular dimensions on machined and pressed parts follow ISO 2768 unless your drawing specifies tighter, part-specific tolerances.
Final-inspection sampling plans follow ANSI/ASQ Z1.4 (equivalent to ISO 2859-1) AQL tables, or 100% inspection where the part or buyer requires it.
Export wooden crates and pallets are heat-treated/fumigated to ISPM-15, accepted at customs in the USA, EU, UK, Australia and most other destinations.
Automotive or other regulated-industry buyers requiring PPAP/APQP documentation, IATF 16949-aligned records, or a specific customer quality manual should flag this at RFQ stage — we scope it into the quotation.
Every order — die, pressed part, SPM or hammer mill screen — moves through the same eight-stage discipline, with a quality check built into the stage itself rather than left to the end.
Drawing, material and tolerance reviewed for feasibility (DFM). Quotation and lead time issued, typically within 3–5 working days.
Press tools, dies, jigs and fixtures designed and built in-house against the approved engineering drawing.
Trial-run parts measured on CMM / profile projector against the drawing. Sample forwarded for your written approval before production begins.
Every raw-material batch checked against its mill test certificate — chemistry, hardness and thickness — before it enters the press shop.
Approved sample locks the process. Set-up sheets and process parameters are held constant for the full order quantity.
Critical dimensions checked at fixed intervals through the run; any non-conforming part is segregated immediately, not sorted out at the end.
Dimensional and visual check on critical characteristics before packing — full-lot check or AQL sampling per ANSI/ASQ Z1.4, as agreed at order confirmation.
Rust-preventive/VCI wrap for ferrous parts, moisture-barrier bagging and ISPM-15 fumigated wooden crates, shipped with a full document set.
Third-party inspection (SGS, Intertek, TÜV or a buyer's nominated agency) is welcomed at any stage, at the buyer's cost. RoHS / REACH declarations are supported on request for applicable materials.
ZED — Zero Defect, Zero Effect — is the MSME Sustainable (ZED) Certification Scheme run by India's Ministry of MSME, delivered through the Quality Council of India (QCI). Applicant units are assessed against a matrix of Quality, Productivity, Environment, Energy and other parameters before a Certification Level is awarded.
Precimax Engineers holds ZED Bronze certification following a site assessment of our Warje Malwadi, Pune facility, covering our manufacturing processes, product range and quality practices.
Alongside ZED Bronze, our Quality Management System is structured to ISO 9001:2015 requirements, with formal third-party certification currently in progress. We're happy to share our current certificates and audit status directly with your quality or procurement team on request.
"Quality is built in, not inspected in — every process, every part."
— Megh Gholap, Director, Quality & Strategy · Lean Six Sigma Black Belt
Our quality function is led by a Lean Six Sigma Black Belt-certified professional with prior experience at the Godrej & Birla Groups, applying the same operational-excellence discipline to every Precimax order — export or domestic.
Straight from our official MSME Sustainable (ZED) Certification Assessment Report — happy to share the full report with your procurement team on request.
| Certifying Authority | Ministry of MSME, Government of India (assessed via QCI) |
|---|---|
| Certification Level | ZED Bronze |
| Certified Unit | Precimax Engineers, Pune, Maharashtra |
| Udyam Registration No. | UDYAM-MH-26-0014755 |
| Enterprise Category | Micro |
| Certification Date | 29 August 2025 |
| Assessment Basis | Quality, Productivity, Environment, Energy & other parameters |
| Validity | 3 years from date of issue, subject to surveillance assessment |
Ask for copies of our ZED Bronze certificate, sample inspection reports, or a proposed control plan for your part.